Check your camera, your local network, and your Windows computer.
Camera lookup
Find your camera.
Type a brand or model, then choose a suggestion to see its requirements and what we have verified. This growing lookup covers 20 models plus Ring camera-family guidance. It is not a complete list of compatible cameras.
Search by brand or model
Start with your camera.
Try a brand such as Wyze, or the exact model on your camera’s label. We’ll show relevant matches here.
What the labels mean
Tested with SimpleMultiCam
Requires an actual test record with the model, firmware and app build. There are no completed records in this list yet.
RTSP supported, not yet tested by us
The manufacturer documents a stream, sometimes through a hub or a specific power mode. Read the conditions; app compatibility is still unverified.
Not directly compatible
No supported direct RTSP path is documented for the listed model. This does not rule out every third-party bridge.
No matching model in this small list.
Not listed means we have not verified it, not that it is incompatible. Check the model spelling or clear the filters. You can also ask us to review your model.
Wyze added integrated RTSP to Cam v3 in its February 2026 release.
What you need to know
Use RTSP-capable camera firmware and Wyze app 3.9 or later. Enable RTSP, use the camera’s stream address and credentials, and keep the PC on the same local network.
Requirements & sources for Wyze Cam v3
This covers Cam v3, not Cam v3 Pro or Pan models. Wyze’s separate legacy-firmware guide also lists v2, v3 and original Pan; that older path is not the only RTSP option for v3. This listing does not promise operation without internet access.
Firmware & hardware
The documented RTSP release is 4.36.16.5654 (February 2, 2026). Current release notes list 4.36.17.21 (September 21, 2026). Confirm RTSP is available in your installed build; the release number is not a SimpleMultiCam test result.
SimpleMultiCam testing
We are testing Wyze RTSP setups. Exact model and firmware verification is still in progress; the development records do not yet qualify this entry for a Tested label.
Evidence
The conditions are summarized here; these manufacturer sources provide the supporting detail.
Sources checked · documentation review, not a camera test
Wyze
Cam v4
RTSP supported, not yet tested by us
Plug-in Wi-FiRTSP documented in beta
Wyze explicitly added RTSP in its Cam v4 beta announcement. Check the firmware on your camera.
What you need to know
Confirm the installed firmware offers RTSP before relying on this connection. Use its stream address and credentials on the same local network; do not assume every v4 firmware has the same support.
Requirements & sources for Wyze Cam v4
The cited RTSP announcement is for beta firmware. Current production notes list newer builds but do not explicitly establish their RTSP requirements. We have not verified that firmware path with SimpleMultiCam. This is not a recommendation to install an old beta or a promise of fully offline operation.
Firmware & hardware
RTSP is explicitly documented in beta 4.52.17.10 (July 27, 2026). The production list shows 4.52.17.26 (September 23, 2026), but does not state an RTSP minimum app version or confirm the feature in that entry.
SimpleMultiCam testing
We are testing Wyze RTSP setups. Exact model and firmware verification is still in progress; the development records do not yet qualify this entry for a Tested label.
Evidence
The conditions are summarized here; these manufacturer sources provide the supporting detail.
Sources checked · documentation review, not a camera test
Wyze
Cam Pan v3
RTSP supported, not yet tested by us
Plug-in Wi-FiIntegrated RTSP · check firmware
Wyze announced integrated RTSP for Cam Pan v3 in February 2026.
What you need to know
The announced release uses firmware 4.50.16.5654 and Wyze app 3.9 or later for RTSP. Confirm the RTSP option on your installed build and use its camera credentials on the same network.
Requirements & sources for Wyze Cam Pan v3
This is Cam Pan v3, not original Pan or Pan v2. Camera pan/tilt capability does not mean SimpleMultiCam can control it. Internet-independent startup has not been verified.
Firmware & hardware
Wyze’s February 2, 2026 release announcement names 4.50.16.5654. App 3.8.5 or later is required to receive that update; app 3.9 or later is required for RTSP.
SimpleMultiCam testing
No completed model-and-firmware SimpleMultiCam test is recorded for this entry. Manufacturer RTSP support is separate from verified app compatibility.
Evidence
The conditions are summarized here; these manufacturer sources provide the supporting detail.
Sources checked · documentation review, not a camera test
Axis
P3265-LVE
RTSP supported, not yet tested by us
PoE EthernetDirect camera stream
The exact-model datasheet lists RTSP and RTSPS.
What you need to know
Provide suitable PoE power and a reachable local Ethernet connection. Use a camera account and confirm the chosen stream profile.
Requirements & sources for Axis P3265-LVE
Use a local camera account and a stream profile supported by your setup. Manufacturer RTSP support does not establish SimpleMultiCam decoding, recording, audio, analytics or export compatibility.
Firmware & hardware
The cited specifications do not name a minimum RTSP firmware. Match the exact model, hardware revision and region before setup; record the installed firmware for testing.
SimpleMultiCam testing
No completed model-and-firmware SimpleMultiCam test is recorded for this entry. Manufacturer RTSP support is separate from verified app compatibility.
Evidence
The conditions are summarized here; these manufacturer sources provide the supporting detail.
Sources checked · documentation review, not a camera test
Dahua
IPC-HDW2449T-S-IL
RTSP supported, not yet tested by us
PoE or 12 V DCDirect camera stream
Dahua lists RTSP for this Smart Dual Light network-camera model.
What you need to know
Connect the powered camera by Ethernet. Confirm the exact suffix, local camera account and stream configuration.
Requirements & sources for Dahua IPC-HDW2449T-S-IL
Use a local camera account and a stream profile supported by your setup. Manufacturer RTSP support does not establish SimpleMultiCam decoding, recording, audio, analytics or export compatibility.
Firmware & hardware
The cited specifications do not name a minimum RTSP firmware. Match the exact model, hardware revision and region before setup; record the installed firmware for testing.
SimpleMultiCam testing
No completed model-and-firmware SimpleMultiCam test is recorded for this entry. Manufacturer RTSP support is separate from verified app compatibility.
Evidence
The conditions are summarized here; these manufacturer sources provide the supporting detail.
Sources checked · documentation review, not a camera test
Uniview
IPC3614SR3-ADF28KM-G
RTSP supported, not yet tested by us
PoE or 12 V DCDirect camera stream
Uniview lists RTSP and RTSP authentication for this exact model.
What you need to know
Use the camera’s local Ethernet address and an authorized camera account. Match the complete model suffix before choosing firmware.
Requirements & sources for Uniview IPC3614SR3-ADF28KM-G
Use a local camera account and a stream profile supported by your setup. Manufacturer RTSP support does not establish SimpleMultiCam decoding, recording, audio, analytics or export compatibility.
Firmware & hardware
The cited specifications do not name a minimum RTSP firmware. Match the exact model, hardware revision and region before setup; record the installed firmware for testing.
SimpleMultiCam testing
No completed model-and-firmware SimpleMultiCam test is recorded for this entry. Manufacturer RTSP support is separate from verified app compatibility.
Evidence
The conditions are summarized here; these manufacturer sources provide the supporting detail.
Sources checked · documentation review, not a camera test
Foscam
V5P
RTSP supported, not yet tested by us
Plug-in Wi-Fi / EthernetDirect camera stream
Foscam’s V5P specifications include RTSP.
What you need to know
Use the specified 12 V adapter and a local Wi-Fi or Ethernet connection. Confirm the camera account, stream address and configured port.
Requirements & sources for Foscam V5P
The model lists H.264 video and dual streams. That is manufacturer capability, not a completed SimpleMultiCam viewing or recording test.
Firmware & hardware
The cited specifications do not name a minimum RTSP firmware. Match the exact model, hardware revision and region before setup; record the installed firmware for testing.
SimpleMultiCam testing
No completed model-and-firmware SimpleMultiCam test is recorded for this entry. Manufacturer RTSP support is separate from verified app compatibility.
Evidence
The conditions are summarized here; these manufacturer sources provide the supporting detail.
Sources checked · documentation review, not a camera test
Tapo
C310
RTSP supported, not yet tested by us
Plug-in Wi-Fi / EthernetDirect camera stream
TP-Link lists RTSP for Tapo C310.
What you need to know
Use its power adapter, then create the separate Camera Account in Tapo’s Advanced Settings. Keep the camera and PC on the same network.
Requirements & sources for Tapo C310
The camera account is separate from your Tapo login. The setup guide documents /stream1 and /stream2 for high and low streams. App behavior still needs model-specific testing.
Firmware & hardware
The cited specifications do not name a minimum RTSP firmware. Match the exact model, hardware revision and region before setup; record the installed firmware for testing.
SimpleMultiCam testing
No completed model-and-firmware SimpleMultiCam test is recorded for this entry. Manufacturer RTSP support is separate from verified app compatibility.
Evidence
The conditions are summarized here; these manufacturer sources provide the supporting detail.
Sources checked · documentation review, not a camera test
TP-Link VIGI
C340 (hardware 2.20)
RTSP supported, not yet tested by us
PoE or 12 V DCDirect camera stream
The C340 hardware 2.20 datasheet lists RTSP.
What you need to know
Check the hardware label: this entry covers version 2.20. Connect with suitable PoE or DC power and use its local camera account.
Requirements & sources for TP-Link VIGI C340 (hardware 2.20)
The cited sheet covers 2.8, 4 and 6 mm lens variants of this hardware version. Do not assume another C340 revision has identical requirements.
Firmware & hardware
Hardware 2.20 is identified by the cited datasheet. A minimum RTSP firmware number is not specified. No exact-firmware SimpleMultiCam test is recorded.
SimpleMultiCam testing
No completed model-and-firmware SimpleMultiCam test is recorded for this entry. Manufacturer RTSP support is separate from verified app compatibility.
Evidence
The conditions are summarized here; these manufacturer sources provide the supporting detail.
Sources checked · documentation review, not a camera test
Reolink
RLC-810A
RTSP supported, not yet tested by us
PoE or 12 V DCDirect camera stream
Reolink lists RTSP for the standalone RLC-810A.
What you need to know
Connect by Ethernet and enable RTSP in the camera’s port settings. Use a local account and verify both the chosen stream and your PC’s decoding performance.
Requirements & sources for Reolink RLC-810A
The specification lists H.265 video. RTSP transport support does not guarantee that every resolution or codec configuration will work well in SimpleMultiCam.
Firmware & hardware
The cited specifications do not name a minimum RTSP firmware. Match the exact model, hardware revision and region before setup; record the installed firmware for testing.
SimpleMultiCam testing
No completed model-and-firmware SimpleMultiCam test is recorded for this entry. Manufacturer RTSP support is separate from verified app compatibility.
Evidence
The conditions are summarized here; these manufacturer sources provide the supporting detail.
Sources checked · documentation review, not a camera test
Amcrest
IP5M-T1277EW-AI
RTSP supported, not yet tested by us
Wired PoEDirect camera stream
Amcrest documents RTSP, ONVIF and H.264 for this 5MP turret camera. Protocol-compatible candidate; a real-camera SimpleMultiCam test is pending.
What you need to know
Connect the camera and Windows computer to the same local network. Use a local camera account and an H.264 stream. Enable ONVIF and its authentication setting when using discovery.
Requirements & sources for Amcrest IP5M-T1277EW-AI
The manufacturer lists three video streams and RTSP port 554 by default. Use the camera-reported stream address. No internet port forwarding is needed for local viewing.
Firmware & hardware
This is a wired Ethernet/PoE model. Match the exact model and record its installed firmware when testing; the cited documentation does not establish a minimum firmware for SimpleMultiCam.
SimpleMultiCam testing
Pending real-camera test. Live video, recording, playback, audio and reconnection have not been verified with this model in SimpleMultiCam. Manufacturer protocol support is not a completed app compatibility test. Camera-side AI events are not claimed as integrated.
Evidence
Manufacturer documentation supports the protocol listing below, not a successful SimpleMultiCam test.
Sources checked · documentation review, not a camera test
Amcrest
IP8M-T2499EW / EB
RTSP supported, not yet tested by us
PoE or 12 V DCDirect camera stream
Amcrest’s exact-model datasheet lists RTSP for the EW and EB variants.
What you need to know
Use a local camera account and its Ethernet address. Amcrest’s IP-camera guide uses port 554, channel 1 and subtype 0 for the main stream.
Requirements & sources for Amcrest IP8M-T2499EW / EB
The documented stream path is /cam/realmonitor?channel=1&subtype=0. Keep camera credentials private. Codec and saved-footage behavior require a separate SimpleMultiCam test.
Firmware & hardware
The cited specifications do not name a minimum RTSP firmware. Match the exact model, hardware revision and region before setup; record the installed firmware for testing.
SimpleMultiCam testing
No completed model-and-firmware SimpleMultiCam test is recorded for this entry. Manufacturer RTSP support is separate from verified app compatibility.
Evidence
The conditions are summarized here; these manufacturer sources provide the supporting detail.
Sources checked · documentation review, not a camera test
Tapo
C110
RTSP supported, not yet tested by us
Plug-in Wi-FiDirect camera stream
A local RTSP feed is documented. SimpleMultiCam testing is still pending.
What you need to know
Create a separate Camera Account in Tapo → Advanced Settings. Use the camera’s local address on the same network.
Requirements & sources for Tapo C110
High stream: /stream1. Low stream: /stream2. Default port: 554. The camera account is separate from your Tapo login.
Firmware & hardware
Minimum firmware is not specified in the cited guide. Confirm your hardware revision and regional firmware before setup.
SimpleMultiCam testing
No completed model-and-firmware test record is published for this entry. RTSP availability alone does not verify viewing, recording, audio or export behavior in SimpleMultiCam.
Evidence
The conclusion and conditions are summarized above. These original sources are available for reference.
Sources checked · documentation review, not a camera test
Tapo
C210
RTSP supported, not yet tested by us
Plug-in Wi-FiDirect camera stream
A local RTSP feed is documented. This does not verify pan/tilt control in SimpleMultiCam.
What you need to know
Create a separate Camera Account in Tapo → Advanced Settings. Keep the camera and PC on the same network.
Requirements & sources for Tapo C210
High stream: /stream1. Low stream: /stream2. Default port: 554.
Firmware & hardware
Minimum firmware is not specified in the cited guide. Confirm your hardware revision and regional firmware before setup.
SimpleMultiCam testing
No completed model-and-firmware test record is published for this entry. RTSP availability alone does not verify viewing, recording, audio or export behavior in SimpleMultiCam.
Evidence
The conclusion and conditions are summarized above. These original sources are available for reference.
Sources checked · documentation review, not a camera test
Tapo
D225
RTSP supported, not yet tested by us
Hardwired mode requiredConditional direct stream
RTSP is available only with hardwired power, a jumper cable, and Always-On mode.
What you need to know
Battery-only operation does not meet this RTSP requirement. Follow the manufacturer’s wiring instructions, then create a Camera Account.
Requirements & sources for Tapo D225
Check the selected power mode before trying a connection. The same Camera Account and local-network setup applies.
Firmware & hardware
Hardware, region and firmware must support Always-On mode; no minimum firmware number is specified in the cited guide.
SimpleMultiCam testing
No completed model-and-firmware test record is published for this entry. RTSP availability alone does not verify viewing, recording, audio or export behavior in SimpleMultiCam.
Evidence
The conclusion and conditions are summarized above. These original sources are available for reference.
Sources checked · documentation review, not a camera test
Reolink
RLC-520A
RTSP supported, not yet tested by us
PoE or DC powerDirect camera stream
The manufacturer lists RTSP for this model. No hub is required for a standalone connection.
What you need to know
Connect by Ethernet with suitable PoE or DC power. Enable RTSP in the camera’s port settings and use its local account.
Requirements & sources for Reolink RLC-520A
Reolink Client path: Device Settings → Network → Advanced → Port Settings. Enable the RTSP service needed for this connection.
Firmware & hardware
Match firmware to the exact hardware revision. Published specifications vary by revision; no minimum RTSP firmware is stated.
SimpleMultiCam testing
No completed model-and-firmware test record is published for this entry. RTSP availability alone does not verify viewing, recording, audio or export behavior in SimpleMultiCam.
Evidence
The conclusion and conditions are summarized above. These original sources are available for reference.
Sources checked · documentation review, not a camera test
Reolink
E1 Pro
RTSP supported, not yet tested by us
Plug-in Wi-FiDirect camera stream
Reolink lists standalone RTSP support for E1 Pro.
What you need to know
Use the camera’s local account and enable RTSP. Check that the label says E1 Pro, not E1.
Requirements & sources for Reolink E1 Pro
The similarly named E1 has different requirements: Reolink lists a Home Hub or NVR connection for that model.
Firmware & hardware
The cited support chart does not specify a minimum firmware version. Confirm the exact model and hardware revision.
SimpleMultiCam testing
No completed model-and-firmware test record is published for this entry. RTSP availability alone does not verify viewing, recording, audio or export behavior in SimpleMultiCam.
Evidence
The conclusion and conditions are summarized above. These original sources are available for reference.
Sources checked · documentation review, not a camera test
Reolink
Argus 3 Pro
RTSP supported, not yet tested by us
Battery · Hub requiredStream through Home Hub
RTSP comes from a compatible Reolink Home Hub, not directly from the battery camera.
What you need to know
Verify the hardware revision and hub-support firmware. Reolink documents battery-camera RTSP sessions of up to 5 minutes through the hub.
Requirements & sources for Reolink Argus 3 Pro
The camera can sleep and require a new stream request. Wake-up can take time. Continuous recording and reconnection in SimpleMultiCam have not been verified.
Firmware & hardware
Reolink lists hub-support firmware as available for BIPC_566MIX16M35C10F5MP, BIPC_566MIX16M35C10E4MP and BIPC_523MIX32M35C10A4MP. Other revisions are not verified here.
SimpleMultiCam testing
No completed model-and-firmware test record is published for this entry. RTSP availability alone does not verify viewing, recording, audio or export behavior in SimpleMultiCam.
Evidence
The conclusion and conditions are summarized above. These original sources are available for reference.
Sources checked · documentation review, not a camera test
Tapo
C420
Not directly compatible
Battery Wi-FiNo documented RTSP feed
Not directly compatible: Tapo lists C420 as not supporting RTSP.
What you need to know
Do not assume a battery camera or its hub provides an accessible local stream.
Requirements & sources for Tapo C420
This entry concerns the manufacturer-supported RTSP path. Third-party workarounds have not been evaluated with SimpleMultiCam.
Firmware & hardware
No RTSP-enabling firmware is documented in the cited manufacturer FAQ.
SimpleMultiCam testing
No completed model-and-firmware test record is published for this entry. RTSP availability alone does not verify viewing, recording, audio or export behavior in SimpleMultiCam.
Evidence
The conclusion and conditions are summarized above. These original sources are available for reference.
Sources checked · documentation review, not a camera test
Blink
Mini
Not directly compatible
Plug-inNo official RTSP feed
Not directly compatible: no officially supported RTSP feed.
What you need to know
The manufacturer’s answer says Blink cameras do not support RTSP. A phone-app live view does not establish local-stream support.
Requirements & sources for Blink Mini
The cited answer is for the original Blink Mini and is displayed as five years old. Third-party bridges are outside this entry; it does not mean every workaround is impossible.
Firmware & hardware
No officially supported RTSP firmware is established by the available source. This is not a test of Mini 2 or later models.
SimpleMultiCam testing
No completed model-and-firmware test record is published for this entry. RTSP availability alone does not verify viewing, recording, audio or export behavior in SimpleMultiCam.
Evidence
The conclusion and conditions are summarized above. These original sources are available for reference.
Not directly compatible with SimpleMultiCam. We do not have a supported Ring integration or a verified direct local camera feed.
What you need to know
Ring Edge brings other manufacturers’ ONVIF cameras into Ring. It does not turn a Ring camera into a local RTSP source for SimpleMultiCam.
Requirements & sources for Ring cameras and video doorbells
Ring developer APIs
Ring now advertises developer video APIs, including WebRTC and RTSP. Those require a separate app integration; SimpleMultiCam has not implemented or tested one. This is not a claim that Ring has no RTSP capability anywhere.
Third-party bridges
Third-party tools such as ring-mqtt can relay Ring video as RTSP, but their streams still travel through Ring’s cloud. These bridges are not a tested or supported SimpleMultiCam integration, and do not provide a native local camera feed.
Scope and testing
Brand guidance for Ring video doorbells, Indoor, Stick Up / Outdoor, Spotlight and Floodlight cameras. This is a documentation review, not model-by-model hardware or firmware testing. It does not classify another manufacturer’s ONVIF camera just because it is connected to Ring Edge.
No model/firmware combination is verified here for direct SimpleMultiCam use. Battery versus wired power alone does not establish compatibility; no universal recording-duration limit is assumed.
Evidence
The supporting sources describe different connection paths; none is advertised here as a SimpleMultiCam integration.
Earlier development work included Wyze Cam v3 and v4 using RTSPS. The precise firmware, connection method, and final customer build still need documented retesting. These historical notes do not qualify either model for a Tested label.
Three things to check
Does your setup fit?
A camera that shares local video.
Look for RTSP or RTSPS in the manufacturer’s instructions. This lets SimpleMultiCam receive the picture directly. Working in a phone app does not always mean the camera supports it.
The same home or work network.
Your computer must be able to reach the camera on your local network. The camera guide helps you find its address and connection settings.
A suitable Windows PC.
The current preview runs on Windows. Supported Windows versions and hardware requirements will be confirmed before release. Mac and Linux versions are not available.
RTSP means Real-Time Streaming Protocol; RTSPS adds encryption when supported. A separate Low stream is optional. Stream path, codec, authentication, firmware, and resolution also affect compatibility. Use manufacturer instructions for the exact model. If a camera depends on a bridge or special firmware, that must be documented and tested; a Wyze preset alone does not establish support.
Don’t see your camera?Tell us the make and model. Prepare an email for our support team.View detailsHide details
Camera compatibility questions
Ask about your camera.
Include the exact model, your question, and an email address where we can reply.
Send from your email app
Review your draft, then choose Email draft to open a message to Support@SimpleMultiCam.com. Review and send it from your email app.
Email draft
Ready for your review.
Your message is ready to open in your email app. Review the recipient and contents, then send it there. If the draft does not appear, copy it and paste it into your email.
Include the make, exact model, and firmware version if you know it.
02
Describe the question.
Tell us what you want to check and what the manufacturer says about RTSP support.
03
Keep details private.
Leave out camera passwords, stream addresses, serial numbers, and personal footage.
A request does not guarantee compatibility or a response date. Only reviewed camera findings belong in the list; inquiry contact details stay separate.
Computer and storage
What is known. What needs testing.
Current development platform
Windows; captured package is x64
Release support and hardware
Windows versions, CPU, memory, graphics, and camera capacity: pending
Recording storage
Dedicated folder on the computer or a suitable attached drive; device and sustained-write tests pending
Remote viewing
No built-in internet portal; manufacturer phone app or separate remote desktop
Camera count alone does not establish capacity. Resolution, bitrate, viewing, recording, and storage speed all matter.
Once connected, run Check my setup with your intended cameras and recordings, then inspect saved footage and exports. A short diagnostic check is useful evidence, not a capacity certification. If a feed drops during phone-app viewing, close the phone app and compare.